Samer Adeeb, PhD

Associate Professor, Structural Engineering

Office: 7-245 Donadeo Innovation Cntr for Engineering 
Phone: 780 492 2190
E-mail: adeeb@ualberta.ca
Website: http://sameradeeb.srv.ualberta.ca

Research Interests and Research Currently in Progress

Pipelines

  • Effect of material plastic anisotropy on the longitudinal behavior of pipelines
  • The effect of the geometric variation of the pipeline on its buckling response
  • The Bourdon effect in pipelines
  • The effect of the internal pressure on the failure strain of pipelines with circumferential flaws
Biomechanics

  • Finite Element Analysis of functional spinal unit
  • Surface Topography for scoliosis
  • Biomechanical analysis of shoulder repair constructs
  • Digital Image correlation in ligaments and biological tissue
  • Fractal analysis of Bone
  • Analysis of fluid content in Intervertebral discs in health versus symtptomatic spines
  • Analysis of bone growth (Long bones and Lower Jaw)

Education

  • Ph.D. in Structural Engineering, University of Calgary, Calgary, AB, 2005
  • B.Sc. in Civil Engineering (Structures), Ain Shams University, Cairo, Egypt, 1999

Professional Experience

  • 2007 to present, Assistant Professor, Department of Civil and Environmental Engineering, University of Alberta
  • 2004-2006, Stress Analysis Engineer, TransCanada Pipelines Ltd., Calgary, AB.

Professional Affiliations

  • Professional Engineer, Association of Professional Engineers, Geologists, and Geophysicists of Alberta (APEGGA)

Books

  1. Adeeb, S.; Introduction to Solid Mechanics and Finite Element Analysis Using Mathematica. Kendall Hunt. 2011. ISBN: 978-0-7575-8879-2

Refereed Journal Papers

  1. Lischuk, A.; Lee, R.; Kainat, M.; Adeeb, S.; Cheng, J.J.R.; Ferguson, J. and Martens, M. (2012). Effects of Imperfections on Pipelines, a Literature Review. ASCE Journal of Pipeline Systems Engineering and Practice, under review.
  2. Neupane, S.; Adeeb, S.; Cheng, J.J.R., Ferguson, J. and Martens, M. (2012). Modelling the deformation response of high strength steel pipelines, Part I: Material characterization to model the plastic anisotropy. ASME Journal of Applied Mechanics, accepted for publication.
  3. Neupane, S.; Adeeb, S.; Cheng, J.J.R., Ferguson, J. and Martens, M. (2012). Modelling the deformation response of high strength steel pipelines, Part II: Effects of material characterization on the deformation response of pipes. 
  4. ASME Journal of Applied Mechanics, accepted for publication. Kaipatur, N.; Wu, Y.; Adeeb, S.; Stevenson, T.; Major, P. and Doschak, M. (2011). FE modeling and in-vivo validation of a rat model of orthodontic tooth movement using micro-implants as anchorage devices. Clinical Implant Dentistry and Related Research. Under review.
  5. Fathi, A.; Cheng, J.J.R. and Adeeb, S. (2010). A Material Model for High Strength Steel Pipes Using Isotropic Kinematic Hardening. Journal of Offshore Mechanics and Arctic Engineering, under review.
  6. Chow, R.; Begum, F.; Beaupre, L.A.; Carey, J.P.; Adeeb, S. and Bouliane, M.J. (2011). Proximal humeral fracture fixation: Locking plate construct +/- Intramedullary fibular allograft. Journal of Shoulder and Elbow Surgery, accepted for publication.
  7. Reynolds, M.; Reynolds, M.; Adeeb, S. and El-Bialy, T. (2011). 3-D Volumetric Evaluation of Human Mandibular Growth. The Open Biomedical Engineering Journal,5:83-89.
  8. Xia, W.; Adeeb, S. and Nadler, B. (2011). Ballistic performance study of fabric armor based on numerical simulations with multi-scale material model. International Journal for Numerical Methods in Engineering, 87:1007-1024. 
  9. Westover, L. and Adeeb, S. (2011). Cubic Spline Meshless Method for Numerical Analysis of the Two-Dimensional Navier Stokes Equation. International Journal of Numerical Analysis and Modeling, Series B 1(2):172-198. 
  10. Fok, J.; Adeeb, S. and Carey, J. (2010). FEM Simulated Progressive and Non- Progressive Growth from Asymmetric Loading and Vicious Cycle Theory: Scoliosis Study. The Open Biomedical Engineering Journal, 4: 162-169. 
  11. Mathison, C.; Chaudhary, R; Beaupre, L.; Reynolds, M.; Adeeb, S.M. and Bouliane, M. (2010). Biomechanical analysis of proximal humeral fixation using locking plate fixation with an intramedullary fibular allograft. Clinical Biomechanics, 25(7): 642-646.
  12. Emrani, M.; Kirdeikis, R.; Igwe, P.; Hill, D. and Adeeb, S. (2009). Surface Reconstruction of Torsos with and without Scoliosis. Journal of Biomechanics. 42(13): 2200-2204.
  13. Adeeb, S.; Epstein, M. (2009). Fractal Elements. Journal of Mechanics of Materials and Structures. 4(5): 781-797. 
  14. Adeeb, S.; Herzog, W. (2009). Simulation of Biological Growth. Computer Methods in Biomechanics and Biomedical Engineering. 12(6): 617-626.
  15. Sutton, M.A.; Yan, J.; Avril, S.; Pierron, F. and Adeeb, S.M. (2008). Identification of heterogeneous constitutive parameters in a welded specimen: Constant stress and virtual fields methods for material property estimation. Journal of Experimental Mechanics, 48: 451-464.
  16. Epstein, M. and Adeeb, S.M. (2008). The stiffness of self-similar fractals. International Journal of Solids and Structures, 45: 3238-3254.
  17. Gibbons Kroeker, C.A.; Adeeb, S.M.; Tyberg, J.V. and Shrive, N.G. (2006). A 2D FE model of the heart demonstrates the role of the pericardium in ventricular deformation. American Journal of Physiology-Heart and Circulatory Physiology, 291, 2229-2236.
  18. Adeeb, S.M. and Horsley, D. (2006). A Numerical Procedure to Establish a Safe Working Pressure During Excavation of a Pipeline in a Rock Ditch. International Journal of Pressure Vessels and Piping, 83, 448-497.
  19. Gibbons Kroeker, C.A.; Adeeb, S.M.; Shrive, N.G. and Tyberg, J.V. (2006). Compression induced by RV pressure overload decreases regional coronary blood flow in anesthetized dogs. American Journal of Physiology-Heart and Circulatory Physiology, 59(6), H2432-H2438.
  20. Adeeb, S.M.; Scholefield, B.W.J.; Brown, T.G.; Shrive, N.G.; Kroman, J.; Perry, V. H. and Tadros, G. (2005). Modelling, testing and construction of the world’s first ductal canopy. Canadian Journal of Civil Engineering 32(6), 1152-1165. 
  21. Adeeb, S. M.; Zec, M. L.; Thornton, G. M.; Frank, C. B. and Shrive, N. G. (2004). A novel application of the principles of Linear Elastic Fracture Mechanics (LEFM) to the fatigue behaviour of tendon tissue. Journal of Biomechanical Engineering, ASME 126, 641-650.
  22. Adeeb, S.M.; Sayed Ahmed, E.Y.; Matyas, J.; Hart, D.A.; Frank, C.B. and Shrive, N.G. (2004). Congruency effects on load bearing in diarthrodial joints. Computer Methods in Biomechanics and Biomedical Engineering 7(3), 147-158. 
  23. Adeeb, S.M.; Ali, A.; Shrive, N.G.; Frank, C.B. and Smith, D. (2004). Modeling the behaviour of ligaments: A technical note. Computer Methods in Biomechanics and Biomedical Engineering 7(1), 33-42.

Conference Presentations with Refereed Short Papers (6-10 pages)

  1. Kainat, M.; Adeeb, S.; Cheng, J.J.R.; Ferguson, J. and Martens, M.(2012).  Effects of the extent of initial imperfections on the behaviour of pipelines under the combined application of internal pressure, bending moments and axial loading. Proceedings of the International Pipeline Conference (IPC), September 24-28, Calgary, Alberta, Canada. IPC2012-90202.
  2. Kainat, M.; Adeeb, S.; Cheng, J.J.R.; Ferguson, J. and Martens, M.(2012). Identifying initial imperfection patterns of energy pipes using a 3D laser scanner. Proceedings of the International Pipeline Conference (IPC), September 24-28, Calgary, Alberta, Canada. IPC2012-90201.
  3. Islam, K.; Komeili, A.; Adeeb, S.; El-Rich, M.; Ronsky, J.L. and Anderson, J. (2012). Three Dimensional Computational Model for the Study of Patellofemoral Biomechanics. Proceedings of the 10th Computer Methods in Biomechanics and Biomedical Engineering International Symposium, April 11-14, Berlin, Germany.
  4. Mustafy, T.; El-Rich, M.; Islam, K. and Adeeb, S. (2012). A Finite Element Investigation of the Articular Cartilage Contact in Healthy Knee Joint. Proceedings of the 10th Computer Methods in Biomechanics and Biomedical Engineering International Symposium, April 11-14, Berlin, Germany.
  5. Islam, K.; Adeeb, S.; El-Rich, M.; Esfandiapour, F. and Lebrun, C. (2012). Computational Modelling of the Patellofemoral Joint: A Finite Element Approach. Proceedings of Canadian Society of Civil Engineering Annual Conference, June 6-9, Edmonton, Alberta, Canada.
  6. Westover, L.; Olearczyk, J.; Hermann, U.; Adeeb, S. and Mohamed, Y. (2012). Module Rigging Assembly Dynamic Finite Element Analysis. Proceedings of Canadian Society of Civil Engineering Annual Conference, June 6-9, Edmonton, Alberta, Canada.
  7. Kainat, M.; Adeeb, S.; Cheng, J.J.R.; Ferguson, J. and Martens, M.(2012). Measurement of Initial Imperfection of Energy Pipeline Using 3D Laser Scanner. Proceedings of Canadian Society of Civil Engineering Annual Conference, June 6-9, Edmonton, Alberta, Canada.
  8. Schofield, J.; Adeeb, S. and Parent, E. (2012). An assistive Sit-to-Stand Knee-Ankle-Foot-Orthosis. Proceedings of Canadian Society of Civil Engineering Annual Conference, June 6-9, Edmonton, Alberta, Canada.
  9. Begum, F.; Kainat, M.; Chow, R.; Beaupre, L.; Carey, J.; Adeeb, S. and Bouliane, M. (2012). Experimental and Numerical Analysis of Augmented Locking Plate Fixation Repair for Proximal Humeral Fractures. Proceedings of Canadian Society of Civil Engineering Annual Conference, June 6-9, Edmonton, Alberta, Canada.
  10. Vafaeian, B.; Daghreer, S.; El-Bialy, T. and Adeeb, S. (2012). Numerical Analysis of Lipus Propagation Through Dentoalveolar Structure. Proceedings of Canadian Society of Civil Engineering Annual Conference, June 6-9, Edmonton, Alberta, Canada.
  11. Wen, S.; Song, G.; Kainat, M. and Adeeb, S. (2012). Prediction of Thermo-Phyiological Strain in Chemical Protective Clothing: The Impact of Barrier Permeability and Micro-Climate Configuration. Proceedings of the 5th European Conference on Protective Clothing (EPCP), May 29-31, Valencia, Spain.
  12. Wu, Y.; Adeeb, S.; Duke, M.J. and Doschak, M. (2010). Compositional and material properties of rat bone after bisphosphonate and/or strontium ranelate drug treatment. Proceedings of ASBMR. October 15-19, Tonronto, Ontario, Canada. 
  13. Neupane, S.; Adeeb, S.; Cheng, J.J.R. and Zhou, J. (2010). Modelling approaches for anisotropic material properties of high strength steel pipelines and the effect on differential settlement. Proceedings of IPC 2010. September 27-October 1st, Calgary, Alberta, Canada. IPC2010-31206.
  14. Fathi, Ali; Cheng, J.J.R.; Adeeb, S. and Zhou, J. (2010). Critical buckling strain in high strength steel pipes using isotropic-kinematic hardening. Proceedings of IPC 2010. September 27 - October 1st, Calgary, Alberta, Canada. IPC2010-31149
  15. Fathi, A.; Cheng, J.J.R. and Adeeb, S. (2010). Effects of Material Anisotropy on the Buckling Behaviour of High Strength Steel Pipelines. Proceedings of 16th US National Congress of Theoretical and Applied Mechanics, USNCTAM 2010, June 27-July 2. USNCTAM2010-463
  16. Neupane, S.; Adeeb, S.; Zhou, J. and Cheng, J.J.R. (2010). A novel approach for modelling anisotropic material behaviour of high strength pipeline steel. Proceedings of CSCE 2010. June 9-12, Winnipeg, MB, Canada. 
  17. Shrive, N.G.; Kroeker, C.A.G.; Tyberg, J.V.; Frank, C.B.; Thornton, G.M. and Adeeb, S.M. (2009). Modelling and Experiments to Understand Tissue Function. Proceedings of the Annual Meeting of the Society for Experimental Mechanics (SEM), June 1-4, Albuquerque, New Mexico, USA.
  18. Igwe, P.; Emrani, M.; Adeeb, S. and Hill, D. (2008). Assessing Torso Deformity in Scoliosis Using Self-Organizing Neural Networks (SNN). IEEE International Conference on Machine Learning and Applications, December 11-13, San Diego, CA, USA.
  19. Mathison, C.; Adeeb, S.M. and Joseph, T. (2008). Digital Image Correlation Technique applied to repair techniques for proximal humeral fractures. Canadian Society for Civil Engineering (CSCE) June 10-13 2008, Quebec City, Quebec, Canada.
  20. Epstein, M. and Adeeb, S.M. (2008). Fractal Structural Elements. The Tenth Pan American Congress of Applied Mechanics (PACAM X), January 7-11, Cancun, Mexico.
  21. Epstein, M.; Adeeb, S.M. and Herzog, W. (2007). Dynamic loading and biological growth. American Society of Biomechanics (ASB) Annual Conference, August 22-25, Stanford University, San Francisco, California.
  22. Yan, J.; Sutton, M.A.; Reynolds, A.P.; Adeeb, S. and Horsley, D. (2006). Characterization of Heterogeneous Response of Pipeline Steel Weld using Digital Image Correlation. 2006 SEM (Society of Experimental Mechanics) Annual Conference, Jun 4-7, 2006, St Louis, Missouri.
  23. Adeeb, S.; Horsley, D.; Yan, J.; Sutton, M.A. and Reynolds, A.P.; (2006). Local stress-strain response of an axial X100 girth weld under tensile loading using digital image correlation. Proceedings of IPC 2006. September 25-29, Calgary, Alberta. IPC2006-10330.
  24. Adeeb, S.; Horsley, D.; Zhou, J. and Sadoway, B. (2006). Establishing a safe working pressure during excavation of a pipeline in a rock ditch. Proceedings of IPC 2006. September 25-29, Calgary, Alberta. IPC2006-10179.
  25. Adeeb, S.; Zhou, J. and Horsley, D. (2006). Investigating the effect of UOE forming process on the buckling of line pipes using finite element modelling. Proceedings of IPC 2006. September 25-29, Calgary, Alberta. IPC2006-10175.
  26. Shen, G.; Adeeb, S.; Coote, R. I.; Horsley, D.; Tyson, W. R.; Gianetto, J. and Bouchard, R. (2006). Fatigue crack driving force for axial surface cracks in pipes. Proceedings of IPC 2006. September 25-29, Calgary, Alberta. IPC2006-10177.
  27. Abdelatif Hassanein, S. S.; Adeeb, S. and Shrive, N. G. (2006). Comparison of closed-form and surrogate limit state functions for corroded pipelines: Reliability-based design approach. Proceedings of IPC 2006. September 25-29, Calgary, Alberta. IPC2006-10247.
  28. Lukasiewicz, S.A.; Czyz, J.A.; Sun, C. and Adeeb, S. (2006). Calculation of strains in dents based on high resolution in-line caliper survey. Proceedings of IPC 2006. September 25-29, Calgary, Alberta. IPC2006-10101.
  29. Adeeb, S. M.; Scholefield, B.W.J.; Nowodworski, H.; Rosiak, K.; Perry, V. H.; Kroman, J.; Tadros, G.; Brown, T. G. and Shrive, N. G. (2004). Modelling and testing of the world’s first ductal canopy. Proceedings of the 4th International Conference on Advanced Composite Materials in Bridges and Structures, July 20-23, Calgary, Alberta, Canada.
  30. Adeeb, S. M.; Nowodworski, H.; Rosiak, K.; Perry, V. H.; Kroman, J.; Tadros, G.; Brown, T. G. and Shrive, N. G. (2004). Modelling of the world’s first ductal architectural shell structure. Proceedings of the International Symposium: Advances in Concrete through Science and Engineering, March 21-24, Northwestern University, Evanston, Illinois, USA.
  31. Adeeb, S.M.; Meakin, J.R.; Hart, D.A.; Frank, C.B. and Shrive, N.G. (2001). Axisymmetric models of load bearing in the knee joint: assessment of geometry, stresses & biology. Proceedings of 5th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, October 31-November 3, Rome, Italy.

Conference Presentations with Refereed Abstracts or One- to Two-page Papers

  1. Optimum position of the Acetabulum in Hip Resurfacing- A Finite Element Analysis study. Proceedings of the 2012 Canadian Orthopaedic Association/Canadian Orthopaedic Research Society (COA/CORS) Annual Meeting, June 8-10, Ottawa, Ontario, Canada.
  2. Schofield, J.; Adeeb, S.; and Parent, E. (2012). An Assistive Knee-Ankle-Foot-Orthosis and Sit-To-Stand Biomechanics. Proceedings of the ASME 2012 Summer Bioengineering Conference, SBC2012, June 20th-23rd, Fajardo, Puerto Rico, USA. 
  3. Mustafy, T.; El-Rich, M.; Islam, K. and Adeeb, S. (2012). Finite Element Analysis of the Patellofemoral Joint Behavior Under Frontal Impact. Proceedings of the ASME 2012 Summer Bioengineering Conference, SBC2012, June 20th-23rd, Fajardo, Puerto Rico, USA.
  4. Islam, K.; Mustafy, T.; Adeeb, S.; El-Rich, M.; Ronsky, J.L. and Anderson, J. (2012). A Novel Approach to Quantify PatelloFemoral Joint Contact Stress. Proceedings of the 18th European Society of Biomechanics (ESB), July 1-4, Lisbon, Portugal.
  5. Guden, R.; Komeili, A.; Vafaeian, B.; Werle, J.; Adeeb, S. and Elrich, M.(2012). Optimal Position of Acetabular Component in Hip Resurfacing-A Finite Element Analysis Study. Proceedings of the European Federation of National Associations of Orthopaedics and Traumatology (EFORT) 13th Congress, May 23-25, Berlin, Germany.
  6. Vafaeian, B.; Aldaghreer, S.; Adeeb, S. and El-Bialy, T. (2012). Finite Element Analysis of Ultrasound Propagation through Dog Mandible. Proceedings of the 41st Annual Meeting of the American Association for Dental Research, March 21, Tampa, Florida, USA.
  7. Schofield, J.; Adeeb, S.; Parent, E.; Benterud, K. and Donauer, A. (2011). Knee-Ankle-Foot-Orthrosis and Sit-toStand Biomechanics. Spotlight on Research, Shaw Conference Centre, November 2nd, Edmonton, AB, Canada.
  8. Eric, P.; Zhang, P.; Hill, D.; Hedden, D.; Moreau, M.; Adeeb, S. and Lou, E. (2011).Test-retest Reliability of Rull-Torso Surface Topography Measurements in Patients with Adolescent Idiopathic Scoliosis with a Thoracic Curve Being a Major Component of the Curve Pattern (typically including Lenke 1,2,3,4 and 6 curves). Proceedings of the Women & Children’s Health and Research Institute (WCHRI) Annual Research Day, November 30th, Edmonton, AB, Canada. 
  9. Komeili, A.; Adeeb, S. and El-Rich, M. (2011). A Way to Seek the Bijective Mapping of Morphological Changes. Proceedings of the 12th Annual Alberta Biomedical Engineering Conference, October 21,Banff, Alberta, Canada. 
  10. Najari, M.; El-Rich, M.; Adeeb, S.; Virk, A. and Taha, B. (2011). Orthodontic Mini-Implant Orientation Effect in Load Bearing: Finite Element Analysis. Proceedings of the 12th Annual Alberta Biomedical Engineering Conference, October 21,Banff, Alberta, Canada.
  11. Islam, K.; Adeeb, S.; El-Rich, M. and Ronsky, J.L. (2011). On Estimating Penetration Depth of the Patellofemoral Joint. Proceedings of the 12th Annual Alberta Biomedical Engineering Conference, October 21,Banff, Alberta, Canada. 
  12. Begum, F.; Kainat, M.; Adeeb, S. and Carey, J.P. (2011). Numerical Analysis of Augmented Locking Plate Fixation Repair for Proximal Humeral Fractures. Proceedings of the 12th Annual Alberta Biomedical Engineering Conference, October 21,Banff, Alberta, Canada.
  13. Gudena, R.; Komeili, A.; Vafaeia, B.; Adeeb, S. and El-Rich, M. (2011). Optimum Position of the Acetabular Component in Hip Resurfacing Arthroplasty - A Finite Element Analysis. Proceedings of the 4th Annual Alberta Fellows Research Symposium, May 4th, Calgary, Alberta, Canada.
  14. Chow, R.; Begum, F.; Beaupre, L.; Carey, J.P.; Adeeb. S. and Bouliane, M. (2011). Proximal Humerus Fracture Fixation: Locking Plate Construct +/- Intramedullary Fibular Allograft. Proceedings of the 2011 Canadian Orthopaedic Association/Canadian Orthopaedic Research Society (COA/CORS) Annual Meeting, July 7-9, St. John’s, Newfoundland and Labrador, Canada.
  15. Chow, R.; Begum, F.; Beaupre, L.; Carey, J.P.; Adeeb, S and Bouliane, M. (2011). Proximal Humerus Fracture Fixation: Locking Plate Construct +/- Intramedullary Fibular Allograft. Proceedings of the 2011 American Academy of Orthopaedic Surgeons (AAOS) Annual Meeting, February 15-19, San Diego, California, USA.
  16. Begum, F.; Chow, R.; Gilmour, N., Beaupre, L.; Carey, J.P.; Adeeb, S. and Bouliane, M. (2010). Biomechanical analysis of proximal humerus fractures for cyclic loading using locking plate fixation with an intramedullary fibular autograft. Proceeding of the 11th Alberta Biomedical Engineering Conference, October, Banff, Alberta, Canada.
  17. Kaipatur, N.; Wu, Y.; Adeeb, S.; Stevenson, T.; Major, P. and Doschak M. (2010).FE modlling and in-vivo validation of orthodontic tooth movement using mini-implants as anchorage devices: a pilot study in rats. Proceedings of the 2010 Canadian Association of Orthodontists (CAO) and the Canadian Association of Oral and Maxillofacial Surgeons (CAOMS) Joint Schientific Session, September 23-25, Whistler, BC, Canada.
  18. Kaipatur, N.; Wu, Y.; Adeeb, S.; Major, P. and Doschak M. (2009). Numerical Evaluation of Stress Profile of Mini-Implant and Rat Bone: A FEM Study. Proceedings of the 10th Alberta Biomedical Engineering Conference (BME), October 23-25, The Banff Centre, Banff, AB, Canada.
  19. Reynolds, M.; Turner, K.; Adeeb, S. and El-Bialy, T. (2009). Growth trends of a Mandible using CT Data. Proceedings of the 10th Alberta Biomedical Engineering Conference (BME), October 23-25, The Banff Centre, Banff, AB, Canada.
  20. Wu, Y.; Adeeb, S. and Doschak M. (2009). Compositional and Material Properties of Rat Bone after Drug Treatment. Proceedings of the 10th Alberta Biomedical Engineering Conference (BME), October 23-25, The Banff Centre, Banff, AB, Canada.
  21. Emrani, M.; Hill, D.; Lou, E.; Adeeb, S.; Parent, E. and Raso, J. (2009). Torso surface indices describing the rib cage deformity in scoliosis. The 32nd Conference of the Canadian Medical and Biological Engineering Society, May 20th – 22nd, Calgary, AB, Canada.
  22. Mathison, C.; Chaudhary, R; Beaupre, L.; Joseph, T; Adeeb, S.M. and Bouliane, M. (2009). Biomechanical analysis of proximal humeral fixation using locking plate fixation with an intramedullary fibular allograft. Canadian Orthopaedic Association (COA) and Canadian Orthopaedic Resident Association (CORA) Annual Meeting, July 4th, Whistler, B.C., Canada.
  23. Fok, J.; Raso, J.; Adeeb, S. and Carey, J. (2008). Geometric Development and Spine Growth for Use in a Scoliosis Growth Model. Spotlight on Research, Shaw Conference Centre, November 5th, Edmonton, AB, Canada. 
  24. Hill, D.; Edmond, L.; Parent, E.; Hedden, D. and Adeeb, S. (2008). Assessing scoliosis with surface topography. Spotlight on Research, Shaw Conference Centre, November 5th, Edmonton, AB, Canada.
  25. Damaraju, S.; Emrani, M.; Hill, D.; Lou, E.; Adeeb, S. and Raso, J. (2008). Assessing scoliosis using full torso 3D features. Proceedings of the 9th Alberta Biomedical Engineering Conference (BME), October 24-26, The Banff Centre, Banff, AB, Canada.
  26. Ng, A.; Boyd, S. and Adeeb, S.M. (2008). Fractal analysis of osteoarthritic human wrists. Proceedings of the 9th Alberta Biomedical Engineering Conference (BME), October 24-26, The Banff Centre, Banff, AB, Canada.
  27. Mathison, C.; Reynolds, M.; Chaudhary, R.; Beaupre, L.; Bouliane, M. and Adeeb, S.M. (2008). Biomechanical evaluation of locking plate with fibular allograft implementation as a fixation technique for proximal humerus fractures. Proceedings of the 9th Alberta Biomedical Engineering Conference (BME), October 24-26, The Banff Centre, Banff, AB, Canada.
  28. Reynolds, M.; Mathison, C.; Rosvold, J.; Darcy, S.; Adeeb, S.M. and Shrive, N.G. (2008). Using digital image correlation for ligament strain correlation. Proceedings of the 9th Alberta Biomedical Engineering Conference (BME), October 24-26, The Banff Centre, Banff, AB, Canada.
  29. Emrani, M.; Igwe, P.; Adeeb, S.M.; Hill, D. (2008). Surface topography and scoliosis. Proceedings of the Rehabilitation Research Conference, Highlighting Research Advances in Rehabilitation and Spasticity Management, May 8-9, Edmonton, AB, Canada.
  30. Fok, J.; Raso, J.; Adeeb, S.M. and Carey, J. (2007). Spine Modeling for Scoliosis Research – Geometry Development. Proceedings of the 8th Alberta Biomedical Engineering Conference (BME), October 19-21, The Banff Centre, Banff, AB, Canada. 
  31. Fok, J.; Carey, J. and Adeeb, S.M. (2007). Computer simulated scoliosis spine growth. Spotlight on Research, Shaw Conference Centre, November 1st, Edmonton, AB, Canada.
  32. Adeeb, S.M.; Epstein, M. and Herzog, W. (2007). Time and stress dependent growth model. 9th US National Congress on Computational Mechanics, July 23-26, San Francisco, California.
  33. Gibbons Kroeker, C.A.; Adeeb, S.M.; Tyberg, J.V. and Shrive, N.G. (2004). A Finite Element Model of the heart -Some Implications for Coronary Blood Flow. Canadian Cardiovascular Society Congress Meeting, October, Calgary, Alberta, Canada.
  34. Gibbons Kroeker, C.A.; Adeeb, S.M.; Tyberg, J.V. and Shrive, N.G. (2004). A Finite Element Model of the heart -Some Implications for Coronary Blood Flow. Cardiovascular Systems Dynamics Society, July, Banff, Alberta, Canada. 
  35. Gibbons Kroeker, C.A.; Adeeb, S.M.; Tyberg, J.V. and Shrive, N.G. (2004). A Finite Element Model of the heart -Some Implications for Coronary Blood Flow. American Heart Association, Nov., New Orleans, USA.
  36. Adeeb, S. M.; Shrive, N. G.; Hart, D. A. and Frank, C. B. (2004). Finite element modeling of the meniscus and congruency of diarthrodial joints. Proceedings of the 2nd Annual Meeting on Biology of the Meniscus, March 10, San Francisco, California, USA.
  37. Adeeb, S. M.; Frank, C. B. and Shrive, N. G. (2004). Congruency effects on load bearing in diarthrodial joints, numerical models. Proceedings of the 12th Annual Symposium on Computational Methods in Orthopaedic Biomechanics, March 6, San Francisco, California, USA.
  38. Adeeb, S. M. and Shrive, N. G. (2004). Congruency effects on load bearing in diarthrodial joints, numerical models. Proceedings of the 6th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, February 25-28, Madrid, Spain.
  39. Adeeb, S. M. and Shrive, N. G. (2003). The use of finite element analysis to investigate the importance of the shear properties of the human meniscus and the possible deformation of a longitudinal vertical tear under axial loading. Proceedings of the 2003 Scientific Conference, Canadian Arthritis Network.
  40. Adeeb, S. M. and Shrive, N. G. (2003). Effects of congruency on load bearing in diarthrodial joints, numerical models. Proceedings of the 4th Alberta BME Conference, October 24-26, The Banff Centre, Banff, Alberta, Canada.
  41. Adeeb, S.M.; Shrive, N.G.; Frank, C.B. and Smith, D. (2002). Modeling the behaviour of ligaments: A technical note. Proceedings of IV World Congress of Biomechanics, August 4-9, Calgary, Alberta, Canada.
  42. Adeeb, S.M.; Hart, D.A.; Frank, C.B. and Shrive, N.G. (2002). An axisymmetric biphasic model of load bearing in the knee joint. Proceedings of IV World Congress of Biomechanics, August 4-9, Calgary, Alberta, Canada.
  43. Gibbons Kroeker, C.A.; Adeeb, S.M.; Tyberg, J.V. and Shrive, N.G. (2002). A 2-d hyperelastic F-E model of the heart under normal and abnormal loading. Proceedings of IV World Congress of Biomechanics, August 4-9, Calgary, Alberta, Canada.
  44. Gibbons Kroeker, C.A.; Adeeb, S.M.; Tyberg, J.V. and Shrive, N.G. (2002). A 2-D hyperelastic F-E model of the heart under normal and abnormal loading. Proceedings of The International Symposium on Cardiovascular Remodeling and Function, October, Osaka, Japan.
  45. Gibbons Kroeker, C.A.; Adeeb, S.M.; Tyberg, J.V. and Shrive, N.G. (2002). A 2-D hyperelastic F-E model of the heart under normal and abnormal loading. Proceedings of the American Heart Association, 75th Scientific Sessions, Chicago, U.S.A.
  46. Adeeb, S. M.; Hart, D. A.; Frank, C. B. and Shrive, N. G. (2001). An axisymmetric biphasic model of load bearing in the knee joint. Proceedings of the 2nd Alberta BME Conference, October 26-28, The Banff Centre, Banff, Alberta, Canada.