Roger Cheng, PhD, PEng

C.W. Carry Professor of Steel Structures, Structural Engineering

Office: 7-306 Donadeo Innovation Cntr for Engineering 
Phone: 780 492 2992
E-mail: roger.cheng@ualberta.ca  

Research Interests

  • Steel structures
  • Rehabilitation of structures using fiber reinforced composite materials
  • Energy pipelines
  • Structural health monitoring
  • Design and behaviour of steel structures
  • Cold-formed steel structures
  • Structural stability
  • Structural connections
  • Fracture and fatigue
  • Engineered wood products and systems
  • Advanced composite materials

Dr. Cheng was appointed to the C.W. Carry Chair in Steel Structures in 1997. From 2002 to 2017, Dr. Cheng served as the Chair of the Department of Civil and Environmental Engineering.

Education

  • Ph.D. 1984. The University of Texas at Austin, Austin, Texas, USA
  • M.Sc. 1981. Civil Engineering, The University of Texas at Austin, Austin, Texas, USA
  • B.Sc. 1976. Hydraulic Engineering, National Cheng-Kung University, Taiwan

Technical committtees

  • Member, CSA S806 – Design and Construction of Building Components Using Fibre Reinforced Polymers
  • Member, CSA S136 – Design of Cold-Formed Steel Members
  • Member, SSRC Task Group 14: Thin-Walled Member Construction
    • SSRC Task Group 15: Laterally Unsupported Beams
    • SSRC Task Group 28: Computer Applications
  • Member, International Society for Structural Health Monitoring of Intelligent Infrastructure
  • Member, CSCE, Structures Division – Timber Structures Committee
    • Advanced Composite Materials Committee
    • Steel Structures Committee

Refereed Journal Publications

  1. Das, S., Cheng, J.J.R., Murray, D.W. and Nazemi, N. 2008. “Effect of Monotonic and Cyclic Bending Deformations on NPS12 Wrinkled Steel Pipeline”, Journal of Structural Engineering, ASCE, Vol. 134 (12), December, pp. 1810-1817.
  2. Zhao, R.G., Huang, R.F., Khoo, H.A., and Cheng, J.J.R. 2008. "Parametric Finite Element Study on Slotted Rectangular and Square HSS Tension Connections". Journal of Constructional Steel Research, accepted on May 29, 2008.
  3. FAN, C., Jar, B. P-Y, Cheng, J.J.R., and Davis, P. 2008. "Mode II Interlaminar Fracture Toughness of Glass FIbre Reinforced Composite with the Presence of Bridging Fibres and Stitching Threads". Journal of Reinforced Plastics and Composites, accepted on Jan. 31, 2008.
  4. SEN, M., Cheng, J.J.R., Murray, D.W., and Zhou, J. 2008. "Mechanical Properties of Cold Bend Pipes". Journal of Pressure Vessel Technology, ASME, Vol. 130 (2), 021708-6 pages.
  5. FAN, C., Jar, B. P-Y, and Cheng, J.J.R. 2008. "Cohesive Zone with Continuum Damage Properties of Simulation of Delamination Development in Fibre Composites and Failure of Adhesive Joints". Engineering Fracture Mechanics, Vol. 75, pp. 3866-3880.
  6. YU, H., Al-Hussein, M., Nasseri, R. and Cheng, J.J.R. 2008. "Innovative Precast Concrete Foundation System for Residential Construction". Canadian Journal of Civil Engineering, Vol. 35 (2), pp. 190-199.
  7. VANZOWL, T.R., Cheng, J.J.R., Tadros, G. 2008. “Long-Term Structural Health Monitoring of the Crowchild Trail Bridge”. Canadian Journal of Civil Engineering, Vol. 35(2), pp. 179-189.
  8. LAM, A.C.C., Cheng, J.J., Yam, C.H., KENNEDY, G.D. 2007. “Experimental and Numerical Study of CFRP/Steel Double Lap Joints under Tensile Loading”, Canadian Journal of Civil Engineering, Vol. 34 (12), pp. 1542-1553.
  9. DAS, S., Cheng, J.J.R., and Murray, D.W. 2007. "Prediction of Fracture Life of a Wrinkled Steel Pipe Subject to Low Cycle Fatigue Load". Canadian Journal of Civil Engineering, Vol. 34 (9), September, pp. 1131-1139.
  10. DAS, S., Cheng, J.J.R., and Murray, D.W. 2007. "Prediction of Fracture in Wrinkled Energy Pipelines subjected to Cyclic Deformation". International Journal of Offshore and Polar Engineering, Vol. 17 (3), September, pp. 205-212.
  11. Fan, C., Jar, P.-Y. B., Cheng, J.J. R. 2007. “Internal-Notched Flexure (INF) Test for Measurement of Mode II Delamination Resistance of Fibre-Reinforced Polymers (FRP),” Journal of Composite Materials, 15 MS pages + 7 figures.
  12. Fan, C., Jar, P.-Y. B., Cheng, J.J. R. 2007. “Prediction of Energy Release Rates for Crack Growth using FEM-Based Energy Derivative Technique,” Engineering Fracture Mechanics, ScienceDirect, 74 (2007), pp.1243-1254.
  13. Das, S. and Cheng, J.J.R., Murray, D.W. 2007. “Behaviour of Wrinkled Steel Pipelines Subjected to Cyclic Axial Loadings”, Canadian Journal of Civil Engineering, 34(5), May, pp. 598-607.
  14. Das, S., Cheng, J.J.R., and Murray, D.W. 2007. “A Test Method to Determine Low-Cycle Fatigue Behavior of Winkled Pipe”, J. of Testing and Evaluation, ASTM, 31(1), Jan., pp. 1-9.
  15. Kamel, A. J.J.R. Cheng, A.E. Elwi. 2006. “Experimental Study on the Behaviour of CFRP Sheets Bonded to Concrete”. Canadian Journal of Civil Engineering, 33(11), Nov., pp. 1438-1449.
  16. Khoo, H.A., Cheng, J.J.R., and Hrudey, T.M. 2006. “Microvoid Damage Model with Material Dilations for Ductile Fracture”, J of Eng Mech, ASCE, 132(10), Oct., pp. 1067-1076.
  17. Fan, C., Jar, P.Y.B., Cheng, J.J.R. 2006. “Energy-Based Analysis of Delamination Development on Fibre-Reinforced Polymers Under 3-Point Bending Test”. Composite Science Technology, Vol. 66, pp. 2143-2155.
  18. Fan, C., Jar, P.Y.B., Cheng, J.J.R. 2006. “Revisit the Analysis of End-Notched-Flexure (ENF) Specimen”. Advanced Composites Letters, 14(5), pp. 171-174.
  19. Fan, C., Jar, P.Y.B., Cheng, J.J.R. 2006. “An Energy-Based FEM Technique for Analyzing Delamination Development in Fibre-Reinforced Polymers”. Composite Science Technology, Vol. 66, pp. 2143-2155.
  20. Fan, C., Jar, P.Y.B., Cheng, J.J.R. 2006. “A Unified Approach to Quantify the Role of Friction in Beam-Type Specimens for the Measurement of Mode II Delamination Resistance of Fibre Reinforced Polymers”. Composite Science Technology, ScienceDirect, 7 pages.
  21. Setiadi, Y., Jar, P.-Y. B., Kuboki, T., and Cheng, J.J.R. 2006 “Comparison of Damage Development in Random FRPs under Cyclic Loading,” J of Comp Mat’ls, Vol. 40, pp. 71-91.
  22. Dorey, A., Murray, D.W., and Cheng, J.J.R. 2006. “Critical Buckling Strain Equations for Energy Pipelines – A Parametric Study”. J of OMAE, ASME, 128(3), pp. 248-255.
  23. Dorey, A., Cheng, J.J.R., Murray, D.W. “Initial Imperfection Models for Segments of Line Pipes”. J of Offshore Mech and Artic Eng, ASME, accepted April 28, 2005, 10 journal pages.
  24. Walbridge, S., Grondin, G.Y., and Cheng, J.J.R. 2005. “Gusset Plate Connections under Monotonic and Cyclic Loading” Can J of Civil Eng, 32(10), Oct., pp. 981-995.
  25. Kuboki, T., Jar, P.-Y. B., and Cheng, J.J.R. 2005. “Damage Development in Glass Fibre Reinforced Polymers (GFRP) under Transverse Loading,” J of Adv Comp Mat’ls, 14(2), 131-145.
  26. Kuboki, T., Jar, P.-Y. B., and Cheng, J.J.R. 2005. “Partitioning of Energy Loss in Glass-Fibre-Reinforced Polymers under Transverse Loading,” J of Mat’ls Eng and Perf, 14(3), 315-321.
  27. Kuboki, T., Gallagher, E., Jar, P.-Y. B., Cheng, J.J.R. 2005 “A New Method to Quantify Delamination Resistance of FRPs under Transverse Loading,” App Comp Mat’ls, 12(2), p93-108.
  28. Kamel, A.E., Elwi, A.E., and Cheng, J.J.R. 2004. “Experimental Investigation on FRP Sheets Bonded to Concrete”. Emirates J for Eng Res, 9 (2), 71-76.
  29. Kamel, A.E., Elwi, A.E., and Cheng, J.J.R. 2004. “Bond Model for FRP Sheets Bonded to Concrete”. Emirates J for Eng Res, 9 (2), 77-82.
  30. Yuen, S., Kuboki, T., Jar, P-Y B., Forest, T.W., and Cheng, J.J.R. 2004. “Effect of Indenter Size on Delamination Initiation in GFRP under Transverse Loading”. J of Mat’l Sci, 39 (14), 4637-4641.
  31. Deniaud, C. and Cheng, J.J.R. 2004. “A Simplified Shear Design Method for Concrete Beams Strenthened with FRP Sheets”. J of Comp for Constr, ASCE, 8 (5), 425-433.
  32. Khattak, N. and Cheng, J.J.R. 2004. “Performance Assessment of FC Girders in Alberta”. Can J of Civil Eng, 31 (4), August, 637-645.
  33. Kuboki, T., Jar, P-Y B., and Cheng, J.J.R. 2004. “Interlaminar Fracture Toughness and the Associated Fracture Behavior for GFRP”. J of Mat’l Sci, 39 (4), Feb., 1419-1423.
  34. Cheng, J.J.R. and Lau, D.T.W. 2004. “Strengthening of Structures with Surfaced-Bonded FRPs”. Can Civil Engineer, January.
  35. Deniaud, C. and Cheng, J.J.R. 2003. “Reinforced Concrete T-Beams Strengthened in Shear with Fiber-Reinforced Polymer Sheets”. J of Comp for Constr, ASCE, 7 (4), November, 302-310.
  36. Yam, M. C-H and Cheng, J.J.R. 2003. “Consideration of Eccentricity on Compressive Strength of Gusset Plate Connections” J of Constr Steel Res on June 2, 2003, 29 pages.
  37. Ospina, C.E., Alexander, S.D.B., and Cheng, J.J.R. 2003. “Punching of Two-Way Concrete Slabs with Fiber-Reinforced Polymer Reinforcing Bars or Grids”. ACI Struc J, 100 (5), Sept, 589-598.
  38. Kuboki, T., Jar, P-Y B., and Cheng, J.J.R. 2003. “Evaluation of Frictional Energy Loss in Glass Fibre Reinforced Polymers (GFRP)”. J of Mat’ls Sci Let, 22, 993-995.
  39. Mufti, A, Tennyson, R., Cheng, J.J.R. 2003. “Integrated Sensing of Innovative FRP Reinforced Concrete Structures” accepted by J of Prog in Struc Eng, 5 (3), July-Sep, 115-126.
  40. Kuboki, T., Jar, P-Y B., and Cheng, J.J.R. 2003. “Energy Absorption for Indentation Damage in Glass Fibre Reinforced Polymers (GFRP)”. J of Mat’ls Sci Let, Vol. 22, 561-563.
  41. Kuzik, M., Elwi, A.E., and Cheng, J.J.R. 2003. “Cyclic Flexure Tests of Masonry Walls Reinforced with FRP Sheets”. J of Comp for Constr, ASCE, 6 (1), Feb., 20-30.
  42. Yam, M.C.H. and Cheng, J.J.R., 2003. “The Local Buckling Strength of Coped Steel I-Beams”, J of Struc Eng, ASCE, 129 (1), January, 3-11.
  43. Yam, M.C.H. and Cheng, J.J.R., 2002. “Behavior and Design of Gusset Plate Connections in Compression”, J of Constr Steel Res, 58, 1143-1159.
  44. Deniaud, C. and Cheng, J.J.R. 2001. “Shear Behavior of Reinforced Concrete T-Beams with Externally Bonded Fibre-Reinforced Polymer Sheets”. ACI Stru J, Vol. 98 (3), 1-9.
  45. Albert, M.L., Elwi, A.E., and Cheng, J.J.R. 2001. “Strengthening of Unreinforced Masonry Walls Using FRPs”. J of Comp for Constr, ASCE, Vol. 5 (2), May, 76-84.
  46. Deniaud, C. and Cheng, J.J.R. 2001. “Review of Shear Design Methods for Reinforced Concrete Beams Strengthened with Fibre Reinforced Polymer Sheets”. Can J of Civil Eng, 28 (2), 271-281.
  47. Cheng, J.J.R. and Kulak, G.L. 2000 "Gusset Plate Connection to Round HSS Tension Members", Eng J, AISC, 37 (4), 133-139.
  48. Deniaud, C. and Cheng, J.J.R. 2000. “Shear Rehabilitation of G-Girder Bridges in Alberta Using Fibre Reinforced Polymer Sheets”. Can J of Civil Eng, 27 (5), October, 960-971.
  49. Adey, B.T., Grondin, G.Y., and Cheng, J.J.R. 2000. “Cyclic Loading of End Plate Moment Connections”. Can J of Civil Eng, 27 (4), August, 683-701.
  50. Lam, C.C., Yam, M.C.H., Iu., V.P. and Cheng, J.J.R. 2000. “Design of Lateral Torsional Buckling of Coped I-Beams”, J of Constr Steel Res, 54 (3), 423-443.
  51. Grondin, G.Y. and Cheng, J.J.R., 1999. "Sidesway Web Buckling of Steel Beams". Engineering Journal, AISC.
  52. Lam, C.C., Yam, M.C.H., Iu., V.P. and Cheng, J.J.R., 1999. “Design of Lateral Torsional Buckling of Coped I-Beams”, accepted by Journal of Constructional Steel Research on Aug. 10, 1999.
  53. Grondin, G.Y., Elwi, A.E., and Cheng, J.J.R., 1999. "Buckling of Stiffened Steel Plates – A Parametric Study", Journal of Constructional Steel Research, Vol. 50, No. 2, May, pp. 151-175.
  54. Cheng, J.J.R., Kulak, G.L., and Khoo, Heng-Aik, 1998. "Strength of Slotted Tubular Tension Members", Canadian Journal of Civil Engineering, Vol. 25, No. 6, Dec., pp. 982-991.
  55. Walbridge, S., Grondin, G.Y., and Cheng, J.J.R., 1998. “An Analysis of the Cyclic Behaviour of Steel Gusset Plate Connections” Journal of Constructional Steel Research, Vol. 46, No. 1-3, April-June, Paper No.
  56. Adey, B.T., Grondin, G.Y., and Cheng, J.J.R., 1998. “Extended End Plate Moment Connections Under Cyclic Loading”, Journal of Constructional Steel Research, Vol. 46, No. 1-3, April-June, Paper No. 133.
  57. Grondin, G.Y., Chen, Q., Elwi, A.E., Cheng, J.J.R., 1998. "Stiffened Steel Plates Under Compression and Bending - Verification of a Numerical Model", Journal of Constructional Steel Research, Vol. 45, No. 2, Feb., pp. 125-148.

Other Refereed Contributions

  1. Sharma, V.P., Cheng, J.J.R., Obaia, K. 2008. "Intelligent Data Processing and Management for SHM of an Oil Sand Crusher under Impact Load". CSCE Annual COnference, June 4-6, Quebec City, 10 pages.
  2. Dick, T.M., Jar, P.-Y. B., Cheng, J.J. R. 2007. “Prediction of Resistance to Cyclic Loading of Glass-Filled Polycarbonate,” The 6th Canadian-International Composites Conference (CanCom 2007), Winnipeg, Canada, August 14-17, 2007, 12 pages.
  3. Lam, A.C.C., Cheng, J.J.R., Yam, M.C.H. 2007. “Fatigue Repair of Welded Steel Plate with Bonded Composite Patching”, ICRACM, New Delhi, India. Feb. 20-22, pp. 428-435.
  4. Bindiganavile, V., Hao, Z., Cheng, J.J.R., Elwi, A. 2007. “The Application of Carbon FIbre Reinforced Polymer (CFRP) Plates in the retrofit of Deep Masonry Beams”, ICRACM, New Delhi, India. Feb. 20-22, pp. 598-603.
  5. Song, B., Cheng, J.J.R., Chan, D.H., and Zhou, J. 2006. “Numerical Simulation of Stress Relief of Buried Pipeline at Pembina River Crossing”. Proceedings of IPC 2006, International Pipeline Conference, Calgary, Alberta, Canada, Sept. 25-29, 10 pages.
  6. Sen, M., Cheng, J.J.R., Murray, D.W. and Zhou, J. 2006. “Mechanical Properties of Cold Bend Pipes”. Proceedings of IPC 2006, International Pipeline Conference, Calgary, Alberta, Canada, Sept. 25-29, 7 pages.
  7. Chou, Z.L., Cheng, J.J.R. and Zhou, J. 2006.”Monitoring and Prediction of Pipe Wrinkling Using Distributed Strain Sensors”. Proceedings of IPC 2006, International Pipeline Conference, Calgary, Alberta, Canada, Sept. 25-29, 9 pages.
  8. Lam, C.C. Angus., *Cheng, J.J.R., Kennedy, G.D., Yam, M.C.H. 2006. “Study of Stress Distribution of Cracked Steel Plate with Single Sided CFRP Composite Patching”. 3rd International Conference on Bridge Maintenance, Safety and Management, Porto, Portugal, July 16-19, 8 pages.
  9. Khattak, N., *Cheng, J.J.R. 2006. “Numerical Modeling and Assessment of the Shear Key Problems of FC Girder Bridges”. 3rd International Conference on Bridge Maintenance, Safety and Management, Porto, Portugal, July 16-19, 10 pages.
  10. H. Yu, M. Al-Hussein, J.J.R. Cheng, R. Nasseri, 2006 “Development of Landmark Precast Concrete Foundation System for Residential Construction”. The 34th CSCE Annual Conference, Calgary, Alberta, May 23- 26-18, 10 pages.
  11. V.P. Sharma, C.L. Denkhaus, J.J.R. Cheng, K. Obaia, 2006 “Structural Behaviour of Syncrude’s Aurora II Crusher”. The 1st International Specialty Conference of Structural Engineering, CSCE, Calgary, Alberta, May 23- 26-18, 10 pages.
  12. Fan, C., Jar, P.Y.B., Cheng, J.J.R. 2006. “Finite Element Simulation of End Notched Flexure (ENF) Specimen”. CSME Forum, Kananaskis, Alberta, May 21-23, 2006, 14 pages.
  13. Setiadi, Y., Jar, P.Y.B., Cheng, J.J.R. 2006. “A Review of Adhesive Strength between Fibre Composites and Metallic Materials with Consideration of Residual Strsses”. CSME Forum, Kananaskis, Alberta, May 21-23, 2006, 14 pages.
  14. V.P. Sharma J.J.R. Cheng, C.L. Denkhaus, 2005 “Structural Health Monitoring of Syncrude’s Aurora II Crusher in the Canadian Oil Sand Industry”. The 2nd International Conference on Structural Health Monitoring of Intelligent Infrastructure, Shenzhen, China, Nov. 16-18, 10 pages.
  15. T. Van Zwol and *J.J.R. Cheng, 2005 “Long-Term Structural Health Monitoring of the Crowchild Trail Bridge”. The 2nd International Conference on Structural Health Monitoring of Intelligent Infrastructure, Shenzhen, China, Nov. 16-18, 10 pages.
  16. Setiadi, Y., Jar, P.-Y. B., and Cheng, J.J.R. 2005. “Evaluation of Toughness Transfer from Matrix to Random FRP under Cyclic Loading,” CanCom 2005, Vancouver, Aug 16-19, #53, 12pages.
  17. Van Zwol, T. and Cheng, J.J.R. 2005. “Steel Free Bridge Deck: Field Performance and Evaluation”. Inter Innovative Bridge Deck Workshop, April 14-15, Winnipeg, MB, 14 pages.
  18. Behbahanifard, M., Cheng, J.J.R., Murray, D.W., Zhou, J., Adams, K., Yoshizaki, K., Fukuda, N., Como, M., and Cerelli, E. 2004. “Simulation of Cold Bends by Finite Element Method”. 2004 IPC, Calgary, AB.
  19. Sen, M., Cheng, J.J.R., Murray, D.W., Zhou, J., Adams, K., Yoshizaki, K., Fukuda, N., Como, M., and Cerelli, E. 2004. “Full-Scale Tests of Cold-Bend Pipes”. 2004 IPC, Calgary, AB, Oct 4-8, 10 pages.
  20. Cheng, J.J.R. 2004. “Potential and Challenges of Using SHM in Canadian Energy Industry”. 2nd Inter Workshop on SHM of Innovative Civil Eng Struc, Winnipeg, Manitoba, Sept 22-23, 10 pages.
  21. Lam, C.C.A., Cheng, J.J.R., and Yam, M.C.H. 2004. “Study of Tensile Strength of CFRP/Steel Double Lap Joints”. 4th Inter Conf on Adv Comp Mat’ls for Bridges and Struc, Calgary, AB, July 20-23.
  22. Kuzik, M.D., Elwi, A.E., and Cheng, J.J.R. 2004. “Tests on Eccentrically Loaded Slender Masonry Walls Reinforced Externally with CFRP Sheets”. 4th Inter Conf on ACMBS, Calgary, AB, July 20-23.
  23. Cheng, J.J.R. and Khattak, N.A. 2004. “A Study of FC Girder Bridges Using Non-Destructive Methods”. Proc of 2nd Inter Conf on Struc Eng, Mech and Comp, Cape Town, South Africa, July 5-7, 1795-1800.
  24. Cheng, J.J.R., Youzwishen, O., and Khawaja, I.A. 2004. “Repair of Buckled Steel Pipes Using FRP Sleeves”. Proc of 2nd Inter Conf on Struc Eng, Mech and Comp, Cape Town, South Africa, 1789-1794.
  25. Setiadi, Y., Kuboki, T., Jar, P.-Y. B., Cheng, J.J.R. 2004. “Fatigue Degradation and Damage of Random Long-Fiber Reinforced Polymers,” Can Soc for Mech Eng Forum, London, ON, June 1-4.
  26. Kuboki, T., Gallager, E., Jar, P.-Y. B., Cheng, J.J.R. 2004. “Evaluation of Interlaminar Fracture Toughness of FRP Under Transverse Loading Using Plate Specimens”. CSME Forum, London, ON, June .
  27. Yuen, S., Fan, C., Kuboki, T., Jar, P.-Y. B., Forest, T.W., and Cheng, J.J.R. 2004. “Delamination Resistance of FRP Under Transverse Loading”. ANTEC 2004, Chicago, Illinois, May 16-20.
  28. Gallagher, E., Kuboki, T., Jar, P.-Y. B., Cheng, J.J.R. 2004. “Interlaminar Fracture Toughness of FRP under Transverse Loading using Coupon Specimens,” ANTEC2004, Chicago, Illinois, May 16-20.
  29. Mullin, D.T. and Cheng, J.J.R. 2004. “Ductile Gusset Plates – Tests and Analyses”. 2004 Pacific Struc Steel Conf, Long Beach, California, March 24-27.
  30. Mullin, D.T. and Cheng, J.J.R. 2004. “Response of Seismically Loaded Low Rise Steel CBF Structures with Inelastic Gusset Plate Connections”. 2004 Pacific Struc Steel Conf, Long Beach, CA, March 24-27.
  31. Caluttung, R., Mufti, A., Hawk, H, Reimer, S., Tadros, G., Cheng, J.J.R., Bakht, B. 2004. “SHM of Trout River Bridge, Alaska Highway, B.C.” SPIE Conference, San Diego, CA, Mar 3, #5393-26.
  32. Kamel, A., Elwi, A.E., and Cheng, J.J.R. 2003. “Bond Model for FRP Sheets Bonded to Concrete”, 9th ASEC Conference, Abu Dhabi, UAE, Dec. 2003, S223, 10 pages.
  33. Kamel, A., Elwi, A.E., and Cheng, J.J.R. 2003. “Experimental Investigation on FRP Sheets Bonded to Concrete”, 9th ASEC Conference, Abu Dhabi, UAE, Dec. 2003, S223, 10 pages.
  34. Das, S., Cheng, J.J.R., and Murray, D.W. 2003. “Biaxial Strain Ratcheting Behavior of Pressurized Buried Energy Pipelines”. 19th Can Congress of App Mech, June 1-6, Calgary, Alberta.
  35. Kuboki, T., Jar, P-Y B., and Cheng, J.J.R. 2003. “A New Method to Characterize Delamination Resistance of FRP under Transverse Loading”. 19th Can Congr of App Mech, June 1-6, Calgary, Alberta.
  36. Lavers, N., Kuboki, T., Jar, P-Y B., Forest, T.W., and Cheng, J.J.R. 2003. “Effect of Methanol Exposure on Mech. Behaviour of GFRP under Transverse Loading”. 19th Can Cong of App Mech, June 1-6, Calgary.
  37. Kuboki, T., Jar, P-Y B., and Cheng, J.J.R. 2003. “Damage Development in GFRP under Transverse Loading”. Pro of Tech Conf of Soc of Plastics Eng, May 4-8, Nashville, Tennessee.
  38. Kuboki, T., Jar, P-Y B., and Cheng, J.J.R. 2003. “Quantification of Energy Absorption in GFRP under Transverse Loading”. Pro of Tech Conf of Soc of Plastics Eng, May 4-8, Nashville, TN, USA.
  39. Cheng, J.J.R. and Lau, D.T.W. 2002. “Can. Design Code Provisions for Strengthening of Concrete Structures with Surface-Bonded FRPs”. 3rd MESC, Aswan, Egypt, Dec. 17-20.
  40. Kamel, A.S., Elwi, A.E., and Cheng, J.J.R. 2002. “Developing a Rational and Simplified Standard Test Method for FRP Sheets Bonded to Concrete”. 3rd MESC, Aswan, Egypt, Dec. 17-20.
  41. Cheng, J.J.R. and Deniaud, C. 2002. “Behaviour and Design of Concrete Beams Strengthened in Shear by FRP Sheets”. 3rd Mid-East Sym on Struc Comp for Infrastruc App, Egypt, Dec. 17-20.
  42. Mufti, A., Tadros, G., *Newhook, J., and Cheng, J.J.R. 2002. “Structural Health Monitoring of Innovative Bridge Structures in Canada”. Fib 2002 Osaka Congress, Osaka, Japan, Oct. 13-19.
  43. Dorey, A.B., Murray, D.W., and Cheng, J.J.R. 2002. “Material Property Effects on Critical Buckling Strains in Energy Pipelines”, Proc of IPC 2002, Calgary, AB, Sept 19 – Oct. 3, Paper No. 27225.
  44. Das, S., Cheng, J.J.R., Murray, 2002. “Fracture in Wrinkled Linepipe under Monotonic Loading”, Proc of IPC 2002, Calgary, Alberta, Sept. 19 – Oct. 3, Paper No. 27097.
  45. Tennyson, R.C., Cheng, J.J.R., and Manuelpillai, G. 2002. “Application of Fibre Optic Sensors for Monitoring Pipelines”. Proceeding of Inter workshop on SHM, Winnipeg, MB, Sept 19-20, 57-71.
  46. Tadros, G., Cheng, J.J.R., Tromposch, E., and Afhami, S. 2002. “Monitoring of Crowchild Trail Bridge in Calgary, Alberta, Canada”. Proceeding of SHM, Winnipeg, MB, Sept 19-20, 165-174.
  47. Deniaud, C. and Cheng, J.J.R. 2002. “A Simplified Shear Design Method for RC Beams Strengthened with FRP Sheets”. 6th Inter Conf on SMSB, Vancouver, BC, July 31- Aug. 2.
  48. Khattak, N. and Cheng, J.J.R., 2002. “An Investigative Study of FC Girder Bridges in Alberta” 6th Inter Conf on Short and Medium Span Bridges, Vancouver, BC, July 31- Aug. 2.
  49. Khattak, N. and Cheng, J.J.R., 2002. “Non-Destructive Evaluation of Single, Medium Span Concrete Bridges” 6th Inter Conf on Short and Medium Span Bridges, Vancouver, BC, July 31-Aug. 2.
  50. Khoo, H.K., Cheng, J.J.R., and Hrudey, T.M., 2002. “Determine Steel Properties for Large Strain from a Standard Tension Test”, 2nd Material Specialty Conf, CSCE, Montreal, June 5-8, 10p.
  51. Cheng, J.J.R., Khoo, H.K., and Lemenhe, A., 2002. “Discussion of Design Provisions of Welded Tension Members in Design Standards”, 4th Struc Specialty Conf, CSCE, Montreal, June 5-8, 10p.
  52. Bach, L., Cheng, J.J.R., Khoo, H.K., and Bach, J., 2002. “Performance of Wood I-Joists under Moderate Sustained Loading for Five Years”, 4th Struc Specialty Conf, CSCE, Montreal, June 5-8, 10p.
  53. Das, S., Cheng, J.J.R., Murray, D.W., Wilkie, S.A., and Zhou, Z.J., 2001. “Winkle Behavior under Cyclic Strain Reversal in NPS12 Pipe”, 20th OMAE Conf, Rio de Janeiro, Brazil, June 3-8.
  54. Yam, M.C.H., Lam, A.C.C., and Cheng, J.J.R., 2001. “The Local Web Buckling Strength of Stiffened Coped Steel I-Beams”, Proc of 2001 SSRC, Ft. Lauderdale, FL, May.
  55. Cheng, J.J.R. 2001. “Health Monitoring of Structures – R&D Activities in Canada”. Hemispheric Workshop on Future Directions in Repairing and Rehabilitating Bldg and Bridg, April 23-24, Puerto Rico.
  56. Dorey, A.B., Murray, D.W., and Cheng, J.J.R., 2000. “An Experimental Comparison of Critical Buckling Strain Criteria”, IPC 2000, Calgary, Alberta, October 1-5.
  57. Das, S., Cheng, J.J.R., Murray, D.W., and Zhou, Z.J., 2000. “Laboratory Study of Winkle Development and Strains in Pipes”, IPC 2000, Calgary, Alberta, October 1-5.
  58. Yoosef-Ghodsi, N., Cheng, J.J.R., Murray, D.W., Doblanko, R., and Wilkie, S., 2000. “Analytical Simulation and Field Measurements for a Wrinkle on the Norman Wells Pipeline”, IPC 2000, Calgary.
  59. DeGeer, D. and Cheng, J.J.R., 2000. “Predicting Pipeline Collapse Resistance”, International Pipeline Conference (IPC) 2000, Calgary, Alberta, October 1-5.
  60. Cheng, J.J.R. and Deniaud, C. 2000. “Shear Strengthening Using FRP Sheets for Concrete Bridge Girders”. 3rd Canada-Taiwan Workshop on Bridges in Banff, Alberta Canada, July 10-12, 10 pages.
  61. Cheng, J.J.R. and Khattak, N. 2000. “Field Instrumentation and Monitoring of Bridges”. 3rd Canada-Taiwan Workshop on Bridges in Banff, Alberta Canada, July 10-12, 10 pages.
  62. Yam, M.C.H., Angus, C.C.L., Iu, V.P., and Cheng, J.J.R. 2000. “Experimental Investigation of the Local Web Buckling Strength of Coped Steel I-Beams”. 3rd Struc Specialty Conf, CSCE, London, ON, June.
  63. Nast, T.E., Grondin, G.Y. and Cheng, J.J.R. 2000. “Cyclic Behavior of Stiffened Gusset Plate-Brace Member Assemblies”. 2000 SSRC Annual Conference, Memphis, TN, USA, July.
  64. Ospina, C.E., Alexander, S.D.B., and Cheng, J.J.R. 2000. “Punching of Column-Supported Two-Way Concrete Slabs Reinforced with GFRP”. Proceedings of the 3rd International Conference on Advanced Composite Materials for Bridges and Structures in Ottawa, Canada, August 15-18, pp.323-330
  65. Kamel, A.S., Elwi, A.E., and Cheng, J.J.R. 2000. “Experimental Study on the Behavior of CFRP Sheets Bonded to Concrete”. Proceedings of the 3rd International Conference on Advanced Composite Materials for Bridges and Structures in Ottawa, Canada, August 15-18, pp.61-68.
  66. Deniaud, C. and Cheng, J.J.R. 2000. “Evaluation of Shear Design Methods of Reinforced Concrete Beams Strengthened with FRP Sheets”. Proceedings of the 3rd International Conference on Advanced Composite Materials for Bridges and Structures in Ottawa, Canada, August 15-18, pp.307-314.
  67. Cheng, J.J.R. and Lau, D.T. 2000. “Canadian Design Code Provisions for Strengthening of Concrete and Masonry Components with Surface-Bonded FRP”. Proceedings of the 3rd International Conference on Advanced Composite Materials for Bridges and Structures in Ottawa, Canada, August 15-18, pp.857-864.
  68. Lau, D.T. and Cheng, J.J.R. 2000. “Canadian Design Code Provisions for Seismic Design, Repair and Strengthening of Concrete Structures with FRP Composites”. Proceedings of the 3rd International Conference on Advanced Composite Materials for Bridges and Structures in Ottawa, Canada, August 15-18, pp.849-856.
  69. Deniaud, C. and Cheng, J.J.R. 1999. “Experimental Studies of Reinforced Concrete T-Beam Strengthened in Shear by Fibre Reinforced Polymer Sheets”. 4th International Symposium on Fibre Reinforced Polymer for Reinforced Concrete Structures, Baltimore, Maryland, Oct. 31 - Nov. 5.
  70. Dorey, A.B., Murray, D.W., and Cheng, J.J.R., Grondin, G.Y., and Zhou, Z.J., 1999. “Testing and Experimental Results for NPS30 Line Pipe Under Combined Loads”. 18th International Conference on Offshore Mechanics and Artic Engineering (OMAE'99), St. John's, Newfoundland, July 11-16.
  71. Horsley, D.J., Zhou, Z.J., Dorey, A.B., Murray, D.W., and Cheng, J.J.R., Nippard, R., and Pick, F., 1999. “Experimental and Finite Element Analysis Large-Diameter Large-Ratio Hot Tap Tees”. 18th International Conference on Offshore Mechanics and Artic Engineering (OMAE'99), St. John's, Newfoundland, July 11-16.
  72. Afhami, S., Cheng, J.J.R., and Alexander, J. 1999. “Field Assessment of the Bridge Rehabilitation in Fort Saskatchewan, Alberta”. 1999 CSCE Annual Conference, Proceedings Vol. 1, Regina, Saskatchewan, June 2-5.
  73. Taing, K.K., Cheng, J.J.R., and Afhami, S. 1999. “Field Assessment of Crowchild Bridge in Calgary, Alberta”. 1999 CSCE Annual Conference, Proceedings Vol. 1, Regina, Saskatchewan, June 2-5
  74. Afhami, S., Alexander, S.D.B., and Cheng, J.J.R. 1999. “Field Instrumentation and Monitoring of Crowchild Bridge in Calgary, Alberta”. 5th International Conference on Short and Medium Span Bridge, Calgary, Alberta, July 13-16.
  75. Cheng, J.J.R., Grondin, G.Y., and Estabrooks, B. 1999. “Shear Lag Effects on Bolted Cold-Formed Steel Channels in Tension”, 27th CSCE Annual Conference, Regina, Saskatchewan, June 2-5.
  76. Khoo, H.A., Cheng, J.J., Hrudey, T.M., AND Peterson, A.E., 1999. “Test and Prediction of Ductile Fracture in Steel”, 27th CSCE Annual Conference, Regina, Saskatchewan, June 2-5.
  77. Kuzik, M.D., Cheng, J.J.R., and Elwi, A.E. 1999. “Full-Scale Out-of-Plane Cyclic Tests of Masonry Walls with External GFRP Sheets”. 8th North American Masonry Conference, Austin, Texas, June 7-10.
  78. Deniaud, C. and Cheng, J.J.R. 1999. “Shear Rehabilitation of Type G-Girders Using FRP Sheets - An Analytical Study”. 1999 CSCE Annual Conference, Proceedings Vol. 1, Regina, Saskatchewan, June 2-5, pp. 385-394.
  79. Deniaud, C. and Cheng, J.J.R. 1999. “Tests of Reinforced Concrete T-beams Strengthened in Shear by FRP Sheets”. 1999 CSCE Annual Conference, Proceedings Vol. 1, Regina, Saskatchewan, June 2-5, pp. 405-414.
  80. Kuzik, M.D., Cheng, J.J.R., and Elwi, A.E. 1999. “Full-Scale Out-of-Plane Cyclic Tests of Masonry Walls with External GFRP Sheets”. 1999 CSCE Annual Conference, Proceedings Vol. 1, Regina, Saskatchewan, June 2-5.
  81. Cheng, J.J.R. and Grondin, G.Y., 1999. “Recent Development in the Behavior of Cyclically Loaded Gusset Plate Connections” 1999 North American Steel Construction Conference, AISC, Toronto, Ontario, May 19-22, 20 pages.
  82. Alexander, J.G.S. and Cheng, J.J.R., 1998. “Shear Design Model of Concrete Girders Strengthened with Advanced Composite Materials” 5th International Conference on Short and Medium Span Bridge, Calgary, Alberta, July 13-16.
  83. Deniaud, C. and Cheng, J.J.R., 1998. “Shear Rehabilitation of Type G-Girders Using ACM: Experimental Studies” 5th International Conference on Short and Medium Span Bridge, Calgary, Alberta, July 13-16.
  84. Walbridge, S., Grondin, G.Y., and Cheng, J.J.R., 1998. “Analytical Study of the Cyclic Behaviour of Steel Gusset Plate Connections” 2nd Structural Specialty Conference, CSCE, Halifax, Nova Scotia, June 10-13.
  85. Cheng, J.J.R., Grondin, G.Y., and Takai, N., 1998. “Shear Lag Effects on Bolted Cold-Formed Steel Angles in Tension”, 2nd Structural Specialty Conference, CSCE, Halifax, Nova Scotia, June 10-13.
  86. Yam, M.C.H., Sheng, N., Iu, V.P., and Cheng, J.J.R., 1998. “Analytical Study of the Compressive Behaviour and Strength of Steel Gusset Plate Connections” 2nd Structural Specialty Conference, CSCE, Halifax, Nova Scotia, June 10-13.
  87. Walbridge, S., Grondin, G.Y., and Cheng, J.J.R., 1998. “An Analysis of the Cyclic Behaviour of Steel Gusset Plate Connections” 2nd World Congress of Steel Structures, Spain, June 10-13.
  88. Adey, B.T., Grondin, G.Y., and Cheng, J.J.R., 1998. “Extended End Plate Moment Connections Under Cyclic Loading”, 2nd World Congress of Steel Structures, Spain, June 10-13.
  89. DiBattista, J.D., Cheng, J.J.R., Murray, D.W., and Zhou, Z.J. 1998. “Laboratory Tests and Numerical Modelling of Sleeper-Supported Line Pipe”. IPC’98, Calgary, Alberta, June.
  90. Albert, M.L., Cheng, J.J.R., and Elwi, A.E. 1998. “Tests of Unreinforced Masonry Walls Strengthened with External Fiber Reinforced Plastic”. 8th Canadian Masonry Symposium, Jasper, Alberta, May 31 - June 3.
  91. Cheng, J.J.R., 1998. “Repair, Renovation and Strengthening of Concrete Bridges Using Advanced Composite Materials” 2nd Canada-Taiwan Workshop on Bridge Engineering, National Research Council, Taipei, Taiwan, March 9-11.